Specification: Selectable Materials: Metal materials Din Material No. Hardness HB Temperature oC Density g/cm3 CS/Soft Iron 1.1003/1.0038 90~120 -60~+500 7.85 SS304, SS304L 1.4301/1.4306 130~180 -250~+550 7.93 SS316, SS316L 1.4401/1.4404 130~180 -250~+550 7.98 Copper 2.0090 50~80 -250~+400 8.9 Aluminum 3.0255 20~30 -250~+300 2.73...

Specification: Graphited PTFE Asseals 2320A or B Graphifed PTFE (GPTFE)yarn.The packing is soft.There are no free particles of graphite on surface and therefore no contamination can occur. Asseals2320L Graphifed PTFE Packing with oil Packing made of 100£¥ GPTFE yarns,and re-impregnated with a silicone lubricant. Application:Used in...

Specification: Braided from low-sulphur expanded graphite yarns, reinforced with nickel wire. It retains all the inherent benefits of 2000 pure graphite packing, good thermal and chemical resistance, very low friction, the wire reinforcement also provides greater mechanical strength. Other metal materials, Inconel, stainless steel etc. on...

Specification: 2000IK-Graphite Packing with Inconel Wire and Corrosion Inhibitor Corrosion inhibitor acts as a sacrificial anode to protect the valve stem and the stuffing box. Other metal materials, nickel, stainless steel etc. on request. APPLICATION : 2000I & 2000IK is a multi-service packing capable of a wide variety of uses...

Asseals 4800(R) Cork Sheet/roll It is made of clean granulated cork mixed with resin binder, which is compressed to form block, then split into sheets. The sheets have properties of good resilience, good resistance to water, oil and solvents, and good compressibility and so on. PROPERTIES: Distinguish from granule grade Cork sheet(Granule...

Specification: Standard materials: Standard materials recommended by the ANSI B 16.20 ASTM DIN Material No. Maximum HB Maximum HV Materials code Soft Iron 1.1003 90 56 D Low CS 1.0038 120 68 S 4-6Cr1/2Mo 1.7362 130 72 F5 AISI 410 1.4000 170 86 S 410 AISI 304 1.4301 160 83 S 304 AISI 316 1.4401 160 83 S 316 AISI 347 1.4550 160 83...

Specification: Selectable Materials: Strip (Hoop) and the inner and outer ring profile Filler General thickness / mm Name Code Name Code Appropriate Temp.oC V-shape gasket/Ring W-shape gasket/Ring Carbon Steel CS Graphite FG 650 Stainless steel 304(L), 316(L) Asbestos ASB 500 Monel Mon PTFE PTFE 250 4.8/3.0 Ni, Ti Ni, Ti Mica MICA 950...

Specification: Selectable Materials: Strip (Hoop) and the inner and outer ring profile Filler General thickness / mm Name Code Name Code Appropriate Temp.oC V-shape gasket/Ring W-shape gasket/Ring Carbon Steel CS Graphite FG 650 Stainless steel 304(L), 316(L) Asbestos ASB 500 Monel Mon PTFE PTFE 250 4.8/3.0 Ni, Ti Ni, Ti Mica MICA 950...

Specification: Selectable Materials: Strip (Hoop) and the inner and outer ring profile Filler General thickness / mm Name Code Name Code Appropriate Temp.oC V-shape gasket/Ring W-shape gasket/Ring Carbon Steel CS Graphite FG 650 Stainless steel 304(L), 316(L) Asbestos ASB 500 Monel Mon PTFE PTFE 250 4.8/3.0 Ni, Ti Ni, Ti Mica MICA 950...

Specification: Selectable Materials: Strip (Hoop) and the inner and outer ring profile Filler General thickness / mm Name Code Name Code Appropriate Temp.oC V-shape gasket/Ring W-shape gasket/Ring Carbon Steel CS Graphite FG 650 Stainless steel 304(L), 316(L) Asbestos ASB 500 Monel Mon PTFE PTFE 250 4.8/3.0 Ni, Ti Ni, Ti Mica MICA 950...

Specification: Selectable Materials: Strip (Hoop) and the inner and outer ring profile Filler General thickness / mm Name Code Name Code Appropriate Temp.oC V-shape gasket/Ring W-shape gasket/Ring Carbon Steel CS Graphite FG 650 Stainless steel 304(L), 316(L) Asbestos ASB 500 Monel Mon PTFE PTFE 250 4.8/3.0 Ni, Ti Ni, Ti Mica MICA 950...

Specification: Selectable Materials: Strip (Hoop) and the inner and outer ring profile Filler General thickness / mm Name Code Name Code Appropriate Temp.oC V-shape gasket/Ring W-shape gasket/Ring Carbon Steel CS Graphite FG 650 Stainless steel 304(L), 316(L) Asbestos ASB 500 Monel Mon PTFE PTFE 250 4.8/3.0 Ni, Ti Ni, Ti Mica MICA 950...